QUERY · ISSUE

rp2 asm_pio parameterization

openby odewdneyopened 2021-10-15updated 2026-03-24

enhancementport-rp2

Hi,

I would like to pass parameters into the RP2 assembler to configure the generated code, eg adjust a delay loop, change number of bits shifted etc.

I propose an additional parameter to the asm_pio function decorator 'vars' that takes a dictionary, that gets added to the global context that assembler runs in eg:

@asm_pio(vars={"DELAY":10})
def statemachine():
  label("wait")
  set(x,DELAY)
  jmp(x_dec,"wait")

with an addition of gl.update(vars) in the asp_pio dec function

CANDIDATE · PULL REQUEST

rp2: Add execctrl option for the PIO decorator.

openby arachsysopened 2025-09-24updated 2026-02-24

docsport-rp2

Summary

The rp2 PIO assembler includes support for instructions like

mov(y, status)

which can be used to detect when the TX and RX FIFOs pass a configurable threshold, for example to trigger an interrupt handler to fill/empty them.

However, to actually use these instructions, the relevant threshold needs to be configured in the execctrl register, and at present, only the side_pindir bit can be set.

Expose an execctrl= keyword argument in the PIO decorator to do this, together with constants in rp2.PIO which can be used like

@rp2.asm_pio(execctrl = rp2.PIO.STATUS_TXLEVEL + n)
def program():
    [...]
    mov(y, status)
    jmp(not_y, "skip")
    irq(rel(0))
    label("skip")
    [...]

to generate an interrupt if the TX FIFO has fewer than n words left.

This also fixes a bug with the existing side_pindir option, which is meant to be boolean. Previously, if it was passed an integer other than 0 or 1, unintended high bits in the execctrl value would be set, not just the intended bit 29.

Testing

I've tested (and used) this functionality on a real rp2350 board.

Unfortunately there are no in-tree tests at all for the rp2 PIO assembler yet, so there isn't a natural place to add a simple test for this new option. I propose to write a full set of tests to cover as much as I can of that decorator, but will submit in a separate PR.

Trade-offs and Alternatives

It is possible to work around the lack of assembler execctrl support by patching the word of the program array that corresponds to the execctrl register, for example

program[4] = program[4] & ~127 | 1 # set status if txlevel < 1

but this assumes undocumented internal details of the rp2 pio module.