touchPad on Pin 2 (ESP32)
I have downloaded the actual version of Micropython for the ESP32 and i wanted to use Pin 2 as a touchPin. I can decelerate it as a touchpin like this touchPad = TouchPad(Pin(2))
But I cannot read from that: touchPad.read()
Than I get an error: ValueError: Touch pad error
Have anyone an idea?
Unable to use pin 20 as SCL for I2C on ESP32.
I submitted the fix to #8393 to expose pin 20 on ESP32. On the Adafruit Feather ESP32 V2, SCL is pin 20. I loaded the latest nightly build onto my board. I am running into the following issues.
When trying to initalise I2C, it is not accepting pin 20 as a viable option for SCL.
>>> from machine import Pin, I2C
>>> i2c = I2C(0, scl=Pin(20), sda=Pin(22))
E (2540280) i2c: /home/micropython/esp-idf-v4.2/components/driver/i2c.c:767 (i2c_set_pin):scl gpio number error
I2C set up works with pin 14 as SCL.
If I try to simply init pin 20 as an output, it also fails.
>>> from machine import Pin
>>> p20 = Pin(20, Pin.OUT)
E (19500) gpio: gpio_set_direction(263): GPIO number error
@jepler suggested that perhaps the issue is resolved in the ESP IDF v4.4, but an attempt to build MicroPython with that version resulted in a failure to fit in flash. So, I have not tested this possibility.