GD25Q32EEIGR chip does not recognize the development board after burning the Micropython 1.25 firmware
Port, board and/or hardware
PICO2-nRF52840
MicroPython version
The problem is only with the microython firmware that is being burned to version 1.25. Everything works fine after the 1.24 version of the micropython firmware is burned.
Reproduction
Burn the latest version of the micropython firmware (i.e. version 1.25) for the PICO2-nRF52840, and the board cannot be recognized after burning.
Expected behaviour
Flash the latest version of the micropython firmware (i.e. version 1.25) for the PICO2-nRF52840.
Observed behaviour
GD25Q32EEIGR chip could not recognize the development board after burning the micropython 1.25 firmware, but everything worked fine after burning the 1.24 firmware.
Additional Information
No, I've provided everything above.
Code of Conduct
Yes, I agree
Memory corrupted after micropython firmware programming Arduino OPTA
Port, board and/or hardware
Arduino OPTA
MicroPython version
I'm using Arduino Opta with MicroPython and two of them work fine. However, I ordered one online and encountered a problem after programming the firmware. Files in file explorers (Linux or Windows) are corrupted (special characters displayed and undefined files created). If I try to program it with Arduino, it seems to work fine.
I returned it to the reseller who sent me another one but it has the same problem.
Someone else have this problem ?
Thanks
Frédéric
Reproduction
try with :
ARDUINO_OPTA-20241129-v1.24.1.dfu (which works with another boards)
ARDUINO_OPTA-20250326-v1.25.0-preview.410.gdd7a950bb.dfu (which works with at least one other board)
Expected behaviour
No response
Observed behaviour
try with :
ARDUINO_OPTA-20241129-v1.24.1.dfu (which works with another boards)
ARDUINO_OPTA-20250326-v1.25.0-preview.410.gdd7a950bb.dfu (which works with at least one other board)
Additional Information
No, I've provided everything above.
Code of Conduct
Yes, I agree