QUERY · ISSUE

`mpremote mip install` hangs when uploading files

openby agattiopened 2025-11-23updated 2025-11-25

bugport-stm32

Port, board and/or hardware

STM32 port on a NUCLEO-144--F767ZI

MicroPython version

MicroPython v1.27.0-preview.440.ga6864109db on 2025-11-23; NUCLEO-F767ZI with STM32F767

Reproduction

(Optional) Perform a mass erase on all flash blocks.
Build main firmware and mboot, then upload image to the board with deploy-stlink
Reboot the board
Run mpremote mip install unittest
Wait until it hangs

Expected behaviour

mpremote mip should install the required package

Observed behaviour

The upload process hangs at random intervals, and when stopping it via CTRL+C the traceback is as follows (the process was stopped after a few minutes of being stuck at 13%):

Traceback (most recent call last):
  File "/home/agatti/src/micropython/ports/stm32/../../tools/mpremote/mpremote.py", line 6, in <module>
    sys.exit(main.main())
             ~~~~~~~~~^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/main.py", line 614, in main
    handler_func(state, args)
    ~~~~~~~~~~~~^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/mip.py", line 206, in do_mip
    _install_package(
    ~~~~~~~~~~~~~~~~^
        state.transport,
        ^^^^^^^^^^^^^^^^
    ...<4 lines>...
        args.mpy,
        ^^^^^^^^^
    )
    ^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/mip.py", line 169, in _install_package
    _install_json(transport, package, index, target, version, mpy)
    ~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/mip.py", line 131, in _install_json
    _download_file(transport, file_url, fs_target_path)
    ~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/mip.py", line 99, in _download_file
    transport.fs_writefile(dest, data, progress_callback=show_progress_bar)
    ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/transport.py", line 163, in fs_writefile
    self.exec("w(" + repr(chunk) + ")")
    ~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/transport_serial.py", line 309, in exec
    ret, ret_err = self.exec_raw(command, data_consumer=data_consumer)
                   ~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/transport_serial.py", line 295, in exec_raw
    self.exec_raw_no_follow(command)
    ~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/transport_serial.py", line 273, in exec_raw_no_follow
    return self.raw_paste_write(command_bytes)
           ~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^
  File "/home/agatti/src/micropython/tools/mpremote/mpremote/transport_serial.py", line 228, in raw_paste_write
    data = self.serial.read(1)
  File "/usr/lib/python3.13/site-packages/serial/serialposix.py", line 565, in read
    ready, _, _ = select.select([self.fd, self.pipe_abort_read_r], [], [], timeout.time_left())
                  ~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
KeyboardInterrupt

The firmware is still waiting for data to arrive on the serial port when mpremote seems to be stuck:

^C
Program received signal SIGINT, Interrupt.
mp_hal_stdin_rx_chr () at mphalport.c:53
53          for (;;) {
08:14:08 mp_hal_stdin_rx_chr > bt
#0  mp_hal_stdin_rx_chr () at mphalport.c:53
#1  0x08068aec in mp_reader_stdin_readbyte (data=0x2007ff74)
    at ../../shared/runtime/pyexec.c:255
#2  0x08023164 in next_char (lex=lex@entry=0x20037b50) at ../../py/lexer.c:174
#3  0x08023456 in parse_string_literal (lex=0x20037b50, is_raw=false, 
    is_fstring=false) at ../../py/lexer.c:413
#4  mp_lexer_to_next (lex=lex@entry=0x20037b50) at ../../py/lexer.c:696
#5  0x0802443c in mp_parse (lex=lex@entry=0x20037b50, 
    input_kind=input_kind@entry=MP_PARSE_FILE_INPUT) at ../../py/parse.c:1167
#6  0x08068be8 in parse_compile_execute (source=source@entry=0x2007ff7c, 
    input_kind=input_kind@entry=MP_PARSE_FILE_INPUT, 
    exec_flags=exec_flags@entry=65) at ../../shared/runtime/pyexec.c:111
#7  0x08068d90 in do_reader_stdin (c=65) at ../../shared/runtime/pyexec.c:324
#8  pyexec_raw_repl () at ../../shared/runtime/pyexec.c:567
#9  0x080730d4 in stm32_main (reset_mode=<optimized out>) at main.c:718
#10 <signal handler called>

in fact, reconnecting to the serial port will find the interpreter still waiting for data to arrive.

Additional Information

No, I've provided everything above.

Code of Conduct

Yes, I agree

CANDIDATE · ISSUE

mpremote mip install uses /rom as default target.

closedby robert-hhopened 2025-06-13updated 2025-06-13

bugtools

Port, board and/or hardware

RP2 and others with vfsrom enabled

MicroPython version

All versions with vfsrom support.

Reproduction

Get or create a firmware with support for vfsrom. I used an RP2 board.
Populate the /rom directory
Call mpremote mip install <filename>. In my example I used neopixel` as file.

Expected behaviour

Install the file to the board.

Observed behaviour

The install crashes with an error message. The head of that message is:

 mpr mip install neopixel
Install neopixel
Installing neopixel (latest) from https://micropython.org/pi/v2 to /rom/lib
Installing: /rom/lib/neopixel.mpy
Traceback (most recent call last):
  File "/usr/local/bin/mpremote", line 8, in <module>
    sys.exit(main())
             ^^^^^^
  File "/home/robert/.local/lib/python3.11/site-packages/mpremote/main.py", line 569, in main
    handler_func(state, args)
  File "/home/robert/.local/lib/python3.11/site-packages/mpremote/mip.py", line 190, in do_mip

Using the --target option of mpremote avoids that problem. But anyhow /rom should not be accepable as target.

Additional Information

No, I've provided everything above.

Code of Conduct

Yes, I agree