RP2: ADC pins does not work properly in XIAO RP2350
Port, board and/or hardware
XIAO RP2350
MicroPython version
MicroPython v1.26.1 on 2025-09-11; Seeed XIAO RP2350 with RP2350
Reproduction
- Use the firmware in this interface XIAO_RP2350
- Use the following test code
import machine
machine.ADC(29).read_u16()
Expected behaviour
Using my own compiled firmware
MicroPython v1.27.0-preview.135.gd28844d11b.dirty on 2025-09-15; Seeed XIAO RP2350 with RP2350
Type "help()" for more information.
>>> import machine
>>> machine.ADC(4).read_u16()
13955
Observed behaviour
MicroPython v1.26.1 on 2025-09-11; Seeed XIAO RP2350 with RP2350
Type "help()" for more information.
>>> import machine
>>> machine.ADC(29).read_u16()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: Pin doesn't have ADC capabilities
>>>
Additional Information
The reason is that pico-sdk is not the latest.
The ADC function modified the judgment logic after this submission, and changed the range of the ADC pin to be specified by macro(ADC_BASE_PIN and NUM_ADC_CHANNELS).
See: https://github.com/micropython/micropython/commit/34e463d861c5ebb33ec317749a008d461616cfbc
These two macros were not used in pico-sdk until after this commit.
See: https://github.com/raspberrypi/pico-sdk/commit/c88bd53a68fe2199fa4a5e6473ba88278f339a2b
The following file is the xiao rp2350 header file in the pico-sdk used by the current version of micropython. This file does not include the changes submitted above.
See: https://github.com/raspberrypi/pico-sdk/blob/9a4113fbbae65ee82d8cd6537963bc3d3b14bcca/src/boards/include/boards/seeed_xiao_rp2350.h
Please update pico-sdk and release a new firmware version as soon as possible.
Code of Conduct
Yes, I agree
analog read hangs on initialization
Port, board and/or hardware
STM, NUCLEO_G474RE
MicroPython version
MicroPython v1.26.1 on 2025-09-11; NUCLEO_G474RE with STM32G474
Reproduction
from machine import Pin, ADC
adc = ADC(Pin.board.A3)
Expected behaviour
Expect to create a variable adc which would allow reading an analog value from the pin corresponding to A3 on an Arduino shield, then quickly return to the REPL prompt.
Observed behaviour
The interpreter hangs indefinitely with no output, until the hardware is reset.
Additional Information
There is a row of analog pins on that header, labelled A0 - A5. Only A3 produces this behavior; changing the code to any other pin, i.e. adc = ADC(Pin.board.A2) works as expected.
Code of Conduct
Yes, I agree